Austrian dose measurements onboard space station MIR and the International Space Station--overview and comparison.

The Atominstitute of the Austrian Universities has conducted various space research missions in the last 12 years in cooperation with the Institute for Biomedical Problems in Moscow. They dealt with the exact determination of the radiation hazards for cosmonauts and the development of precise measurement devices. Special emphasis will be laid on the last experiment on space station MIR the goal of which was the determination of the depth distribution of absorbed dose and dose equivalent in a water filled Phantom. The first results from dose measurements onboard the International Space Station (ISS) will also be discussed. The spherical Phantom with a diameter of 35 cm was developed at the Institute for Biomedical Problems and had 4 channels where dosimeters can be exposed in different depths. The exposure period covered the timeframe from May 1997 to February 1999. Thermoluminescent dosimeters (TLDs) were exposed inside the Phantom, either parallel or perpendicular to the hull of the spacecraft. For the evaluation of the linear energy transfer (LET), the high temperature ratio (HTR) method was applied. Based on this method a mean quality factor and, subsequently, the dose equivalent is calculated according to the Q(LET infinity) relationship proposed in ICRP 26. An increased contribution of neutrons could be detected inside the Phantom. However the total dose equivalent did not increase over the depth of the Phantom. As the first Austrian measurements on the ISS dosimeter packages were exposed for 248 days, starting in February 2001 at six different locations onboard the ISS. The Austrian dosimeter sets for this first exposure on the ISS contained five different kinds of passive thermoluminescent dosimeters. First results showed a position dependent absorbed dose rate at the ISS.     

Simulation of fast ablation

A brief review of studies on simulation and control of a porous cooling process taking into account material transpiration is given. An approximated solution for an equation of the one-dimensional problem of fast ablation is also presented.     

Experimental study of damping properties of a composite torsion bar in the helicopter main rotor hingeless hub

The results of the experimental studies of damping characteristics of a composite torsion bar in the helicopter main rotor hingeless hub are presented. A variant of their improvement is considered.     

The finite element analysis of shells of revolution with a branching meridian

We present an algorithm for calculating the shells of revolution with the branching meridian using the triangular finite elements, the rigidity matrices of which are formed based on the vector method of displacement interpolation [1]. The correct kinematic and static conditions of shell conjugation on the line of their coupling have been developed. The shell structure consisting of a cylinder and adjacent shells is calculated under various conditions of support.     

Analysis of shells of revolution under symmetrical loading using the quadrature method

The application of the quadrature method [1] to analyzing the shells of revolution under symmetrical loading relative to the zero meridian is considered. The method can be treated as a generalization of the method presented in [2] to solve the Volterra integral equation of the second kind.     

A method for constructing an airfoil using a specified chord velocity diagram

A problem of determining a shape of the airfoil being streamlined by a potential incompressible inviscid flow is solved by the successive approximation method using a specified chord velocity diagram. It is shown that a closed airfoil that possesses a specified chord velocity diagram can be constructed with a sufficient accuracy; if the chord diagram is unsuccessfully specified, the closed airfoil may prove to be not univalent, that is, physically unrealizable.     

Optimal number of phased array faces and signal processors for horizon surveillance

The problem of the optimal number of phased array faces for performing 360/spl deg/ horizon surveillance is considered. Assuming the detection performance is the same in all beam positions and the total number of T/R modules is constant, it is shown that the optimal number of array faces is three. This is true whether the arrays are operating simultaneously or sequentially. A parametric analysis is performed between the number of array faces operating simultaneously and the associated cost of simultaneous operation in terms of the size of the array.     

Distributed decision fusion using empirical estimation

The problem of optimal data fusion in multiple detection systems is studied in the case where training examples are available, but no a priori information is available about the probability distributions of errors committed by the individual detectors. Earlier solutions to this problem require some knowledge of the error distributions of the detectors, for example, either in a parametric form or in a closed analytical form. Here we show that, given a sufficiently large training sample, an optimal fusion rule can be implemented with an arbitrary level of confidence. We first consider the classical cases of Bayesian rule and Neyman-Pearson test for a system of independent detectors. Then we show a general result that any test function with a suitable Lipschitz property can be implemented with arbitrary precision, based on a training sample whose size is a function of the Lipschitz constant, number of parameters, and empirical measures. The general case subsumes the cases of nonindependent and correlated detectors.     

Problem of precision missile guidance: LQR and H/sup /spl infin// control frameworks

Addressed here is the precision missile guidance problem where the successful intercept criterion has been defined in terms of both minimizing the miss distance and controlling the missile body attitude with respect to the target at the terminal point. We show that the H/sup /spl infin// control theory, when suitably modified, provides an effective framework for the precision missile guidance problem. The existence of feedback controllers (guidance laws) is investigated for the case of finite horizon and non-zero initial conditions. Both state feedback and output feedback implementations are explored.     

Structure of the Venusian atmosphere from surface up to 100 km

The goal of this paper is to summarize the experimental data on the atmosphere of Venus obtained after 1985, when the VIRA (Venus International Reference Atmosphere) or COSPAR model was published. Among the most important results that have appeared since then are the following: measurements of the vertical temperature profile by the VEGA spacecraft with high precision and high altitude resolution; measurements made with balloons of the VEGA spacecraft; radio occultation measurements of Magellan, Venera-15, and Venera-16; and temperature profiles derived from the data of infrared spectrometry obtained by Venera-15. The new result as compared to VIRA is the creation of a model of the atmosphere in the altitude range 55 to 100 km dependent on local time. This model is presented in our paper in tabulated form.